Monday, October 11, 2010

Kalil's AP1.5 S2000 - Preview

_ADS8784.JPG

The 2004 model year incorporated several revisions to the S2000 and was given the chassis designation of AP2. The 2004 model introduced newly designed 17 in (43 cm) wheels and Bridgestone RE-050 tires along with a retuned suspension to reduce oversteer. The spring rates and shock absorber damping were altered and the suspension geometry modified to improve stability by reducing toe-in changes under cornering loads. In the gearbox the brasssynchronizers were replaced with carbon fiber. In addition, cosmetic changes were made to the exterior with new front and rear bumpers, revised headlight assemblies, new LED tail-lights, and oval-tipped exhausts.

Since the engine used on the new body was still the F20C, this model has been affectionately called AP1.5, as the AP2 was reserved for the newer F22C-equipped version.

Stay tuned for details on Kalil's project...

Tuesday, July 13, 2010

Loo's FN2R - Preview

The European market Civic Type R is offered only as a three door hatch back and uses a different chassis and internal layout (notably tank placement below the driver's seat), which will serve as base for the next European Jazz. The rear suspension formerly a double wishbone set up has been changed to a less complex torsion beam axle. The drive train is largely the same as the out going model offering 201 PS (148 kW; 198 hp) at 7,500 rpm and 193 N·m (142 lb·ft) of torque at 5,600 rpm. It runs on 225/40 R18 Y88 Bridgestone Potenza RE050A tyres, while optional 19" Rage alloys run on Yokohama Advan Sport 225/35 ZR19 88Y tyres. The car has a curb weight of 1,267 kg (2,790 lb).
  • Chassis Designation: Civic FN2R
  • Engine: 1998 cc
  • Power: 200 HP
  • Torque: 210 Nm
  • Gearbox: 6-Speed MT
  • Weight: 1290 kg
  • Wheels: 18" (Stock)
  • Pwr-to-wt : 0.157HP/kg

Stay tuned for details on Loo's project...

Asoy's DC5R - Preview


The Honda Integra DC5 is a Japanese performance sports car, which was also known as the Acura RSX in North America. The Honda Integra Type-R DC5, sold in Japan has reduced weight, a 220 PS / 164 kW / 217 hp (162 kW) K20A I4 engine (Japan-only; Oceaniamodels have an engine similar to the Acura RSX-S), as well as a limited slip differential (LSD) and stiffer springs and shocks, 4 piston Brembo brakes, 17" wheels on Bridgestone Potenza tires, Recaro suede seats, body trim, and more.

Stay tuned for details on Asoy's project...

Erwin's CL7R - Preview

The Honda Accord Euro R (CL7) was launched in October 2002. The Accord Euro-R is powered by the K20A 2.0liter DOHC i-VTEC engine with 220 horsepower and 21.0kg-m of torque through a lightweight 6-speed manual transmission.
  • Chassis Designation: Accord Euro-R CL7R
  • Engine: 1998 cc
  • Power: 220 HP
  • Torque: 206 Nm
  • Gearbox: 6-Speed MT
  • Weight: 1390 kg
  • Wheels: 17" (Stock)
  • Pwr-to-wt : 0.158HP/kg
Stay tuned for details on Erwin's project...

August's FD2R - Preview

The Japanese market Civic Type R (FD2) went on sale on March 30, 2007. For the first time, the JDM Civic was sold as a four door sports sedan rather than a three door hot hatch. Using the Japanese market four-door sedan as a base model meaning the new Type R is now bigger, wider and heavier. More importantly, the wheelbase has grown from 2,570 mm (101.2 in) to 2,700 mm (106.3 in), giving the FD2R a more stable stance in high speed cornering. The new Japanese model's engine output is higher than the European version's, with 225 PS (165 kW; 222 hp) being developed at 8,400 rpm and 215 N·m (159 lb·ft) of torque peaking at 6,100 rpm (versus 201 PS (148 kW; 198 hp) at 7,800 rpm and 193 N·m (142 lb·ft) at 5,600 rpm for the European model). The base engine itself is borrowed from the Accord Euro R CL7 with its longer intake manifold. Changes have been made to the block in terms of mounting points for ancillary parts making it different from previous K20A. New technology such as Drive By Wire throttle and porting of the intake valve ports using techniques from the NSX are implemented. Honda says mid-range torque is increased by 10 PS (7 kW; 10 hp). Drive is fed through a close ratio six speed gearbox, and a helical limited slip differential is fitted as standard. The front brake discs increased from the DC5R's 300 mm (11.8 in) to 320 mm (12.6 in) are fitted with four pot Brembo calipers. Tire size are now 225/40 R18 Bridgestone Potenza RE070.Honda claims the body is 50% more rigid than the previous Japan-only DC5 Integra Type R, and the new model features an independent rear suspension rather than the torsion beam configuration used on the latest European Civic Type-R. To save weight, aluminum is used extensively and bonded with adhesive instead of welded.Exterior wise, the front bumper is different from the standard Civic designed aerodynamically. The rear bumper features a diffuser built into the bumper and completing the aero package with a huge rear wing. Inside, the trademark black and red bucket seats are no longer made by Recaro as with previous versions, but designed in house by Honda. Also gone is the Momo made steering wheel, instead replaced by a Honda made version. The familiar red-on-black colour scheme or black-on-black scheme is offered on the Championship White version and Super Platinum Metallic Silver versions while a black-on-black scheme with red stitching is for the Vivid Blue Pearl only.

Stay tuned for details on August's project...

Ezan's AP1 S2000 - Preview

The Honda S2000 was a roadster manufactured by the Japanese automaker Honda Motor Company. It was launched in April 1999 and was created to celebrate the company's 50th anniversary. The car was first shown as a concept at the Tokyo Motor Show in 1995, following which it was launched in world markets in 1999. The S2000 is named for its engine displacement of 2 L, carrying on in the tradition of the S500, S600, and S800 roadsters of the 1960s.Several revisions were made throughout the car's lifetime, including changes to the engine,gearbox, suspension and interior and exterior. Officially two variants exist: the initial launch model was given the chassis code AP1, while the AP2 designation was given to vehicles produced from mid-2003 onwards. Though cosmetically similar, the AP2 incorporated significant changes to the drivetrain and suspension. Production of the S2000 ceased in June 2009.The S2000 was introduced in 1999 for the 2000 model year and was given the chassis designation of AP1. It featured a front engine, rear-wheel drive layout with power being delivered by a 1,997 cc (122 cu in) F20C inline 4 cylinder DOHC-VTEC engine producing from 237 hp (177 kW) to 250 PS (184 kW), and from 153 lbf·ft (207 N·m) to 22.2 kg·m (218 N·m) of torque depending on the target market. The engine is mated to a six-speed manual transmission and Torsen limited slip differential. The S2000 achieved what Honda claimed as the "top level performance in the world" for a 2-liter naturally aspirated engine.

Stay tuned for details on Ezan's project...